The Development of Practical Set for PLC Programming to Control a Pneumatic System
Article Sidebar
Main Article Content
Abstract
This research is to develop the teaching and learning of PLC programming for control of pneumatic systems. The research steps are as follows: Step 1: Develop a practice set for programming PLCs to control pneumatic systems, starting with studying the details of the course content and designing a practice set. This research has designed a set of workpiece handling equipment and provided the materials used to create a practice set. Then proceeded to create a practice set and teaching materials for a PLC programing practice set. After that, the developed practice set was given to a sample group of 15 experts to evaluate its appropriateness. The results of research found that the developed PLC programming practice set and teaching materials were suitability at a high level. Step 2 Evaluate efficiency in teaching and learning for PLC programing to control pneumatic systems. The researcher took the developed PLC programming practice set and tested it with a purposive sampling group of 23 third-year mechanical engineering students, Faculty of Technical Education, Rajamangala University of Technology Thanyaburi. The result research was found that the efficiency of teaching and learning was effective 84.96/82.40, which shows that the practice set can be used in teaching and learning effectively.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
copyright in this website and the material on this website (including without limitation the text, computer code, artwork, photographs, images, audio material, video material and audio-visual material on this website) is owned by Journal and its licensors.
References
Chaiyawong, K., Phintha, K., Khamngam, P., & Puseeda, S. (2022). Development of Practice-Based Training Package on Microcontroller of Internet of Things System for High Vocational Education. In 14th National Conference on Technical Education (pp 297-302). [in Thai].
Hart, T. (2018). Practical work: the benefits, challenges, and solutions. Cambridge University Press & Assessment.
Hovimanporn, S. (2018). Programmable Logic Controller. (1st ed.). Bangkok: Academic Promotion Division, King Mongkut's University of Technology North Bangkok. [in Thai].
Juntamongkol, S. & Chimpalee, J. (2020). A Study of the Needs for Teaching Instructional Media for Hydraulics and Pneumatics Course of Students, Faculty of Industrial Education, Rajamangala University of Technology Suvarnabhumi. Narkbhutparitat Journal Nakhon Si Thammarat Rajabhat University, 12(3), 10-22. [in Thai].
Khwanmuang, S. (2021). Pneumatic Training Set Controlled with Electrical and PLC Rajamangala University of Technology Lanna Tak. Journal of Industrial Education, 20(1), 53-63. [in Thai].
Khwanmuang, S. (2021). Programmable logic controller training set. Journal of Industrial Education, 20(3), 80-90. [in Thai].
Kobklangdon, W., Chumchuen, N., & Orakatimakul, S. (2022). Development of Electrical Measurement Tools Practical Training Kit for Industrial Teacher Training. In Proceedings of the 14th National Conference on Technical Education (pp. 324-330). King Mongkut's University of Technology North Bangkok https://doi.org/10.14416/c.fte.2022.06.046
Koednet, A., & Phaudjantuk, S. (2021). Enhancing the Learning Management Design Abilities of Third-year Students in the Bachelor of Education Program in Mathematics through the Use of Learning Management through Practical Skills. Journal of Education Studies, 49(2), EDUCU4902011. [in Thai].
Panprayoon, T. (2020). Construction and Efficiency Verification of the Experimental Set for Electric Motor Controller with Programmable Logic Controller for the Second Years Students in Higher Vocational Certificate Level, Electric Power Division, Chiangrai Industrial and Community Education College. Journal of Teacher Professional Development, 1(1), 75-85. [in Thai].
Porncharoen, P., & Disklud, N. (2021). Development of Conveyor Belt Model Control Demonstration Kit with Pneumatic System. In Proceedings of the 44th Electrical Engineering Conference (EECON44) (pp. 732-735). Rajamangala University of Technology Phra Nakhon.
Rajamangala University of Technology Thanyaburi. (2020). Teaching management in Bachelor’s degree of technical education in mechanical engineering program B.E. 2563. Pathum Thani: Rajamangala University of Technology Thanyaburi. 174.(1st ed.) Rajamangala University of Technology Thanyaburi [in Thai].
Siriwattananon. N., Kohpeisansukwattana. N., & Deewanichsakul. S. (2022). Development of Instructional Package on Pneumatic Control using PLC. Technical Education Journal : King Mongkut’s University of Technology North Bangkok, 13(2), 79-87.
https://ojs.kmutnb.ac.th/index.php/jote/article/view/5973 [in Thai].
Sontipan, B. (2022). “Development of a Programmable Logic Controller Training Kit for Vocational Education Students.” [Master's Thesis in Technical Education, Mechanical Engineering Education, Faculty of Technical Education. Unpublished] King Mongkut's University of Technology North Bangkok. [in Thai].
Srisa-ard, B. (2017). Basic Research (10th ed.). Bangkok: Suwiriyasat. [in Thai].
Suksong, N. & Pratumsuwan, P. (2018). The Servo – Pneumatic System Control through Programmable Logic Controller. In Research Administration Network Conference 12th. May 27-29, 2018, Thammarin Hotel, Trang Province, Thailand. [in Thai].
Suksong, N., Kosolsombat, S., Damnoei, S., Singjan, A., & Saengphothi, C. (2019). The Efficiency Evaluation of Instruction Module for Servo-Pneumatic Control Through PLC. Journal for Research and Innovation Institute of Vocational Education Bangkok, 2(2), 60-72. [in Thai]. https://www.iveb.ac.th/en/journal?id=291